Journals


2021


1
Hong, Min-Sung,  So, Y. S., Lim, J. M., & Kim, J. G. "Evaluation of internal corrosion property in district heating pipeline using fracture mechanics and electrochemical acceleration kinetics." Journal of Industrial and Engineering Chemistry (2021).
2Chung, N.-T.; Hong, M.-S.; Kim, J.-G. Optimizing the Required Cathodic Protection Current for Pre-Buried Pipelines Using Electrochemical Acceleration Methods. Materials 2021, 14, 579
3Park, Y., Hong, M. S., Lee, W. H., Kim, J. G., & Kim, K. (2021). Highly Sensitive Electrochemical Aptasensor for Detecting the VEGF165 Tumor Marker with PANI/CNT Nanocomposites. Biosensors, 11(4), 114.
2020







1Hong, Min-Sung, et al. "Polydopamine/carbon nanotube nanocomposite coating for corrosion resistance." Journal of Materiomics 6.1 (2020): 158-166.
2Hong, M. S., Jeon, Y. S., Kim, W. C., Jeong, J. C., & Kim, J. G. (2020). Optimization of Cathodic Protection System for River-Crossing District Heating Pipeline using Computational Analysis: Part I. The Basic Model. Int. J. Electrochem. Sci, 15, 7013-7026.
3Hong, Min-Sung, Kim, J. G. (2020). Optimization of Cathodic Protection System for River-Crossing District Heating Pipeline using Computational Analysis:Part 2. The effective location of anodes. Int. J. Electrochem. Sci, 15.
4Cho, Sangwon, et al. "Effect of pH on the Passive Film Characteristics of Lean Duplex Stainless Steel in Chloride-Containing Synthetic Tap Water." Int. J. Electrochem. Sci 15 (2020): 4406-4420.
5Chaudry, Umer Masood, Kotiba Hamad, and Jung-Gu Kim. "Ca-induced plasticity in magnesium alloy: EBSD measurements and VPSC calculations." Crystals 10.2 (2020): 67.
6Kim, Yong-Sang, et al. "Improvement of corrosion penetration resistance for aluminum heat exchanger by alloying zirconium." Materials Chemistry and Physics 241 (2020): 122275.
7Masood Chaudry, Umer, Kotiba Hamad, and Jung-Gu Kim. "A Further Improvement in the Room-Temperature Formability of Magnesium Alloy Sheets by Pre-Stretching." Materials 13.11 (2020): 2633.
8Kim, Seon-Hong, Yoon-Sik So, and Jung-Gu Kim. "Fracture behavior of locally corroded steel pipeline in district heating system using the combination of electrochemistry and fracture mechanics." Metals and Materials International (2019): 1-8.
9Cho, Sangwon, and Jung-Gu Kim. "Failure analysis of gas-gas heater tubes for a flue gas desulfurization system." Engineering Failure Analysis 118 (2020): 104945.
10Choi, Seok-Ryul, Kang, Hyungseok, et al. "Electroplated Silver–Nickel Core–Shell Nanowire Network Electrodes for Highly Efficient Perovskite Nanoparticle Light-Emitting Diodes." ACS Applied Materials & Interfaces 12.35 (2020): 39479-39486.
11Lee, Woo-Hyuk, Seok-Ryul Choi, and Jung-Gu Kim. "Effect of Agar as Electrolyte Additive on the Aluminum-Air Batteries." Journal of The Electrochemical Society 167.11 (2020): 110503. 
12Choi, Seok-Ryul, Sol-Ji Song, and Jung-Gu Kim. "Hydrogen Evolution Inorganic Inhibitors in Alkaline Electrolyte for Aluminum-Air Battery." International Journal of Electrochemical Science 15 (2020): 8928-8942.


2019
1Min-Sung Hong, Yunjeong Park, Jung Gu Kim and Kyunghoon Kim,  Effect of Incorporating MoS2 in Organic Coatings on the Corrosion Resistance of 316L Stainless Steel in a 3.5% NaCl Solution, Coatings vol.9, 1 (2019) pp.45-57
2Umer Masood Chaudry, Tae Hoo Kim, Sang Duck Park, Ye Sik Kim, Kotiba Hamad, Jung-Gu Kim, Effects of calcium on the activity of slip systems in AZ31 magnesium alloy, Materials Science & Engineering A, 739 (2019) pp.289–294
3Yong-Sang Kim, Jung-Gu Kim, Electrochemical corrosion behavior of a non-vascular, bi-stent combination, surgical esophageal nitinol stent in phosphate-buffered saline solution, Materials Science & Engineering C vol.94(2019) pp.821-830
4Sol-Ji Song, Seok-Ryul Choi, Jung-Gu Kim, The effect of organic additives for the prevention of copper electrochemical migration, Journal of Electroanalytical Chemistry vol.832 (2019) pp.75-86
5Seung Heon Baek, Hee-Sang Shim, Jung Gu Kim, Do Haeng Hur, Effects of dissolved hydrogen on fuel crud deposition and subcooled nucleate boiling in PWR primary water at 328°C, Nuclear Engineering and Design vol.345 (2019) pp.85–93
6Ko, S. J., An, J. H., Kim, Y. S., & Kim, J. G. (2019). Failure analysis of an AlCu joint manufactured by eutectic diffusion bonding in evaporator tubes. Engineering Failure Analysis, 98, 167-176.
7Hong, M. S., So, Y. S., & Kim, J. G. (2019). Optimization of Cathodic Protection Design for Pre-Insulated Pipeline in District Heating System Using Computational Simulation. Materials, 12(11), 1761.
8Kim, Y. S., & Kim, J. G. (2019). Investigation of Weld Corrosion Effects on the Stress Behavior of a Welded Joint Pipe Using Numerical Simulations. Metals and Materials International, 1-12.
9Masood, U., Hamad, K., & Kim, J. G. (2019). On the ductility of magnesium based materials: A mini review. Journal of Alloys and Compounds.
10Hong, M. S., & Kim, J. G. (2019). Method for Mitigating Electrochemical Migration on Printed Circuit Boards. Journal of Electronic Materials, 48(8), 5012-5017.
11An, J. H., Lee, J., Kim, Y. S., Kim, W. C., & Kim, J. G. (2019). Effects of Post Weld Heat Treatment on Mechanical and Electrochemical Properties of Welded Carbon Steel Pipe. Metals and Materials International, 25(2), 304-312.
12Kim, Y. S., & Kim, J. G. (2019). Improvement of corrosion resistance for low carbon steel pipeline in district heating environment using transient oxygen injection method. Journal of Industrial and Engineering Chemistry, 70, 169-177.
13Yong-Sang Kim, In-Jun Park and Jung-Gu Kim, Simulation Approach for Cathodic Protection Prediction of Aluminum Fin-Tube Heat Exchanger Using Boundary Element Method, Metals vol.9,3 (2019) pp.376-391
2018
1Sol-Ji Song, Sangwon Cho, Woo-Cheol Kim, Jung-Gu Kim, Failure analysis of electric-heater tube for heat-storage tank, Engineering Failure Analysis Vol. 87 (2018) pp.69-79
2Sol-Ji Song, Jung-Gu Kim, Influence of Magnesium Ions in the Seawater Environment on the Improvement of the Corrosion Resistance of Low-Chromium-Alloy Steel, Materials 11.1 (2018), pp.162
3Hyungseok Kang, Sol-Ji Song, Young Eun Sul, Byeong-Seon An, Zhenxing Yin, Yongsuk Choi, Lyongsun Pu, Cheol-Woong Yang, Youn Sang Kim, Sung Min Cho, Jung-Gu Kim, and Jeong Ho Cho, Epitaxial-Growth-Induced Junction Welding of Silver Nanowire Network Electrodes, ACS Nano 12.5 (2018) pp. 4894–4902
4Y.-S.Kim, S.K.Lee, J.-G.Kim, Influence of anode location and quantity for the reduction of underwater electric fields under cathodic protection, Ocean engineering Volume 163, 1 (2018) pp. 476-482
5Sol-Ji Song, Sang Jin Ko, Jae-Ryung Lee, Jung-Gu Kim, Effect of Bis-3-Sulfopropyl-Disulfide on the Characteristics of Trivalent Chromium Electrodeposition, Int. J. Electrochem. Sci., 13 (2018) pp. 7489 – 7504
6Seon-Hong Kim, Ji-Hoon Lee, Jung-Gu Kim, Woo-Cheol Kim, Effect of the Crevice Former on the Corrosion Behavior of 316L Stainless Steel in Chloride‑Containing Synthetic Tap Water, Metals and Materials International 24.3 (2018) pp.516-524
7Yong-Sang Kim, Sang-Jin Ko, Sangkyu Lee, Jung-Gu Kim, Computational Interpretation of the Relation Between Electric Field and the Applied Current for Cathodic Protection Under Different Conductivity Environments, Metals and Materials International 24.2 (2018) pp.315-326
8Kim YS, Park JG, An BS, Lee YH, Yang CW, Kim JG, Investigation of Zirconium Effect on the Corrosion Resistance of Aluminum Alloy Using Electrochemical Methods and Numerical Simulation in an Acidified Synthetic Sea Salt Solution, Materials 11 (2018) pp.1-12
9Yong-Sang Kim, Woo-Cheol Kim, Jung-Gu Kim, Influence of Ultrasonic Nanocrystal Surface Modification on the Corrosion and Stress Corrosion Cracking Behavior of Low Carbon Steel (ASTM A139) Welded Joint in the Simulated District Heating Environment, Corrosion 74 (2018) pp.112-122
10Y.-S.Kim, S.K.Lee, H.-J.Chung, J.-G.Kim, Influence of a simulated deep sea condition on the cathodic protection and electric field of an underwater vehicle, Ocean Engineering 148 (2018) pp.223-233
11Yong-Sang Kim, Jung-Gu Kim, Failure analysis of a thermally insulated pipeline in a district heating system, Engineering Failure analysis 83 (2018) pp.193-206
12Kim Y.-S., Seok S., Lee J.-S., Lee S.K., Kim J.-G., Optimizing anode location in impressed current cathodic protection system to minimize underwater electric field using multiple linear regression analysis and artificial neural network methods, Engineering Analysis with Boundary Elements 96 (2018) pp.84-93
13Baek, S. H., Shim, H. S., Kim, J. G., & Hur, D. H. (2018). Visualization and acoustic emission monitoring of nucleate boiling on rough and smooth fuel cladding surfaces at atmospheric pressure. Nuclear Engineering and Design, 330, 429-436.
14Baek, S. H., Shim, H. S., Kim, J. G., & Hur, D. H. (2018). Effect of chemical etching of fuel cladding surface on crud deposition behavior in simulated primary water of PWRs at 328° C. Annals of Nuclear Energy, 116, 69-77.
15He, Y., Yoo, K. B., Park, J. C., Lee, B. H., Yoon, J. B., Kim, J. G., & Shin, K. (2018). TEM study the corrosion behavior of the low alloy steels developed for flue gas desulfurization system. Materials Characterization, 142, 540-549.
16Masood Chaudry, U., Hoo Kim, T., Duck Park, S., Sik Kim, Y., Hamad, K., & Kim, J. G. (2018). On the high formability of AZ31-0.5 Ca magnesium alloy. Materials, 11(11), 2201.
17Song, G. D., Choi, W. I., Jeon, S. H., Kim, J. G., & Hur, D. H. (2018). Combined effects of lead and magnetite on the stress corrosion cracking of alloy 600 in simulated PWR secondary water. Journal of Nuclear Materials, 512, 8-14.

 2017


1Yong-Sang Kim, and Jung-Gu Kim, Electrochemical and quantum chemical studies of 1, 2, 3-benzotriazole as inhibitor for copper and steel in simulated tap water, Materials transactions 58, 1 (2017) pp. 76-84.
2Yong-Sang Kim, and Jung-Gu Kim, Evaluation of corrosion fatigue and life prediction of lower arm for automotive suspension component, Metals and Materials International 23, 1 (2017) pp. 98-105.
3Yong-Sang Kim, Jeongguk Kim, Dooho Choi, Jae-Yong Lim, Jung-Gu Kim, Optimizing the sacrificial anode cathodic protection of the rail canal structure in seawater using the boundary element method, Engineering Analysis with Boundary Elements 77 (2017) pp. 36-48.
4김용상, 김경민, 이상규, 김정구, 온도 및 유속이 선박의 음극방식 및 수중 전자기장 신호 특성에 미치는영향, 대한금속재료학회지 55.5 (2017) pp. 348-356.
5Yong-Sang Kim, and Jung-Gu Kim, Corrosion Behavior of Pipeline Carbon Steel under Different Iron Oxide Deposits in the District Heating System, Metals 7.5 (2017) pp. 182.
6Seon-Hong Kim, Min-Seok Kwon, and Jung-Gu Kim, Effect of immersion time in a modified green death solution on the rust layer of Cu-containing low-alloy steel, Metals and Materials International 23.1 (2017) pp. 82-91.
7In-Jun Park, Seok-Ryul Choi, and Jung-Gu Kim, Aluminum anode for aluminum-air battery–Part II: Influence of In addition on the electrochemical characteristics of Al-Zn alloy in alkaline solution, Journal of Power Sources 357 (2017)
8Hyeok-Jae Lee, In-Jun Park, Seok-Ryul Choi, and Jung-Gu Kim, Effect of Chloride on Anodic Dissolution of Aluminum in 4 M NaOH Solution for Aluminum-Air Battery, Journal of The Electrochemical Society 164.4 (2017) pp. A549-A554.
9Young-Woong Shin, Sol-Ji Song, and Jung-Gu Kim, Alloying Effects of Molybdenum and Niobium on Chromium Bearing Low Alloy Steel for Water Ballast Tank, Materials transactions 58.9 (2017) pp. 1290-1298.
10Yong-Sang Kim, Sang-Jin Ko, Sangkyu Lee, and Jung-Gu Kim, Analysis of Underwater Electromagnetic Field Reduction by Mixed-type Cathodic Protection Using the Boundary Element Method, Korean Journal of Metals and Materials 55.8 (2017) pp. 591-599.
11Yong-Sang Kim, and Jung-Gu Kim, Electroplating of reduced-graphene oxide on austenitic stainless steel to prevent hydrogen embrittlement, International Journal of Hydrogen Energy 42.44 (2017) pp. 27428-27437.
12Yong-Sang Kim, and Jung-Gu Kim, Failure analysis of a thermally insulated pipeline in a district heating system, Engineering Failure Analysis 83 (2018) pp. 193-206.
13Yong-Sang Kim, Woo-Cheol Kim, and Jung-Gu Kim, Influence of Ultrasonic Nanocrystal Surface Modification on the Corrosion and Stress Corrosion Cracking Behavior of Low Carbon Steel (ASTM A139) Welded Joint in the Simulated District Heating Environment, Corrosion 74.1 (2017) pp. 112-122.
14Y.-S. Kim, S.K. Lee, H.-J. Chung, J.-G. Kim, Influence of a simulated deep-sea condition on the cathodic protection and electric field of an underwater vehicle, Ocean Engineering 148 (2018) pp. 223-233.
15Min-Sung Hong, In-Jun Park, and Jung-Gu Kim, Alloying effect of copper concentration on the localized corrosion of aluminum alloy for heat exchanger tube, Metals and Materials International 23.4 (2017) pp. 708-714.
16Geun Dong Song, Soon-Hyeok Jeon, Jung Gu Kim, and Do Haeng Hur, Synergistic effect of chloride ions and magnetite on the corrosion of Alloy 690 in alkaline solutions, Corrosion 73.3 (2016) pp. 216-220.
17Moon-Sic Park, Hee-Sang Shim, Seung Heon Baek, Jung Gu Kim, Do Haeng Hur, Effects of oxidation states of fuel cladding surface on crud deposition in simulated primary water of PWRs, Annals of Nuclear Energy 103 (2017) pp.275-281.

2016

1Geun-Dong Song, Soon-Hyeok Jeon, Jung Gu Kim and Do Haeng Hur, Effect of Polyacrylic Acid on the Corrosion Behavior of Carbon Steel and Magnetite in Alkaline aqueous Solutions, Corrosion, 72, 8 (2016) pp. 1010-1020.
2Woo-Cheol Kim, Seon-Hong Kim, Jung-Gu Kim and Young-Yul Kim, Investigation of the Biodegradable Mechanism of Pure Magnesium Using Electrochemical Impedance Spectroscopy Technique, The Corrosion Science Society of Korea, 15, 2 (2016) pp. 43-53.
3Jin-Ho Kim,Yong-Sang Kim, Jung-Gu Kim, Cathodic protection criteria of ship hull steel under flow condition in seawater, Ocean Engineering, 115 (2016) pp. 149-158.
4박선아, 신수빈, 김정구, 탈황설비환경에서 Cu, Sb가 첨가된 저합금강과 409L 스테인리스강의 부식 거동 비교 연구, Korean Journal of Metals and Materials, 54, 7 (2016) pp. 492-502.
5Min-Sung Hong, Seon-Hong Kim, Shin-Young Im, and Jung-Gu Kim, Effect of Ascorbic Acid on the Pitting Resistance of 316L Stainless Steel in Synthetic Tap Water, Metals and Materials International, 22, 4 (2016) pp.621-629.

2015


1Yong-Sang Kim, Seon-Hong Kim, and Jung-Gu Kim, Effect of 1, 2, 3-Benzotriazole on the Corrosion Properties of 316L Stainless Steel in Synthetic Tap Water, Metals and Materials International, 21, 6 (2015) pp.1013-1022.
2박진석, 김용상, 남태흠, 김정구, Alloy 600의 양극분극거동과 기계적 성질에 미치는 수소충전 및 전기전송처리의 영향에 관한 연구, Korean Journal of Metals and Materials, 53, 11 (2015) pp. 770-777.
3박선아, 김진호, 김정구, 김영호, 염소이온 농도에 따른 상수도용 304 스테인리스강관의 이음부 틈부식 평가, Korean Journal of Metals and Materials, 53, 11 (2015) pp. 761-769.
4Min-Jun Kim, Seok-Ho Woo, and Jung-Gu Kim, Electrochemical Corrosion Behavior of AISI 409L Stainless Steel Aluminizes by Hot-Dip Coating Method in Automotive Exhaust Gas Solution, Materials Transactions, 56, 9 (2015) pp. 1599-1604.
5Min Jun Kim, Seok Ho Woo, Jung Gu Kim, Yeong Ho Kim, Effect of Weld Oxide on the Corrosion Resistance of Gas Metal Arc Welded Ferritic Stainless Steel Exposed to Simulated Exhaust Condensate, Oxidation of Metals, 84 (2015) pp. 397-411.
6Min Jun Kim, Jung Gu Kim, Effect of Manganese on the Corrosion Behavior of Low Carbon Steel in 10 wt.% Sulfuric Acid, International journal of electrochemical science, 10 (2015) PP. 6872-6885.
7M.J. Kim, S.I. Jang, S.H. Woo, J.G. Kim and Y.H. Kim, Corrosion Resistance of Ferritic Stainless Steel in Exhaust Condensed Water Containing Al Cation, Corrosion, 71, 3 (2015), pp. 285-291.
8Seon-Hong Kim, Sun-Ah Park, Jung-Gu Kim, Kee-Sam Shin and Yinsheng He, Alloying effect of copper on the corrosion properties of low-alloy steel for flue gas desulfurization system, Metals and Materials International, 21, 2 (2015) pp. 232-241.